OVERVIEW
The instructions below may help with the new Intelligent Zoom (auto framing) feature of DTEN firmware v1.5.0 release.
Intelligent Zoom (Auto Framing)
Prerequisite: log into Zoom room > Select the room > Edit > Intelligent Camera > and select “enable Intelligent Zoom when the meeting starts” in Intelligent camera.
- Video demonstration of how auto framing works during a meeting: HERE
Note: It might take 24 hours for the setting to take effect. If you do not see this in your D7 after the firmware update, please contact DTEN Support and be ready to provide a picture, SN number, and DTEN ID.
Known Issue: Currently, the Intelligent Zoom setting in the Zoom Rooms menu on the D7 system does not switch this feature off (see above screenshot highlighted by red square). Please use the ZDM Zoom Rooms settings to enable or disable Intelligent Zoom for that specific D7 system. A fix for this will be available in the next firmware update.
This feature has the following hardware/ software version dependencies:
Dependencies |
Requirement |
DTEN Software Dependencies |
DTEN 1.5.0 |
DTEN Hardware Dependencies |
NO |
Zoom Room Dependencies |
NO |
If you have additional questions, please contact DTEN Support at support@dten.com for assistance.
Comments
0 comments
Article is closed for comments.