How to identify the series of your hardware?
-
- There are various ways to identify the hardware series,
- One of the key indicators is to check the model number which is at the back of the unit.
- D7 Series 1: DB0355
- D7 Series 2: DB50455
- The following characteristics are unique to Series 2 devices
- Matte display
- No DTEN logo display light at the bottom
- No Rs232 commands port
- One of the key indicators is to check the model number which is at the back of the unit.
- There are various ways to identify the hardware series,
D7 55” Series 1 | D7 55"/75" Series 2 |
![]() |
![]() |
What new changes were made in the Series 2 hardware?
- Matte display
- No DTEN logo display light at the bottom
- Rs232 commands through USB Port
What is the new software?
- D7 55” Series 2 has Windows IoT 1809 i5 whereas Series 1 has Windows 10 IoT Enterprise version 1607 (Windows LTSB v1607)
Is DTEN discontinuing Series 1 production?
- Yes
Are there any changes with the specs on D7 55 Series 2?
- All the capabilities, camera system, audio system, inputs and outputs, power, VESA, product dimensions, package dimensions, package weight, operating temperature, remain the same.
- Please refer to the following FAQ to find out what are the differences:
Is DTEN discontinuing models with RS232 control?
- We are updating the RS232 commands through the USB connector/USB port. Please reach out to support@dten.com for the instructions.
Are there any differences in firmware version numbers?
- The version numbers will be different for each series. If there is a new release, we will announce it in the release notes.
Are there any changes to the user interface?
- Initially, the user interface between DTEN D7 Series 1 & Series 2 will be slightly different. Starting with DTEN D7 firmware version 1.8, the user interface will be the same.
Comments
0 comments
Article is closed for comments.