- Available on DTEN Orbit portal, then on Zoom portal approximately 5-7 days later
- DTEN D7 should be powered on and connected to a stable and open or Zoom whitelisted network without a firewall (ethernet preferred). For information, click here
- The update will not start if the device is engaged in a meeting or calendar event.
- The update takes approximately 30-45 minutes; DTEN D7 will automatically restart.
- Do not disconnect or power off during the update.
New
- Supports PTZ presets in BYOD mode.
-
Device setting in Orbit - HDMI default mode
- In Orbit, you can set whether to enter BYOD mode directly after the HDMI connection. An example would be the user is using an Apple TV box with an HDMI connection. In this case, they can toggle this switch to directly display the content of the Apple TV box upon an HDMI connection without having to go through the BYOD selection interface to make the change.
Modified
- Optimized BYOD stability.
Resolved
- n/a
Known Issue
- There is a low probability that the camera cannot be found on the D7, which can automatically be restored.
- When in BYOD mode there is a low probability that the PC cannot recognize the camera. Reinsert the type-c line to recover the recognition.
- When BYOD and ZR are switched, there is a low probability that the device generates no signal, which can automatically be recovered.
- There is currently an issue with mic noise in Teams and Google Meet. We are currently working on optimizing this at the algorithm level, and the optimized algorithm will be included in future versions.
Comments
0 comments
Article is closed for comments.