DTEN D7X Windows Edition & D7X Dual Windows - 3.9.2- March 27, 2025

• DTEN D7X should be powered on and connected to a stable and open or Zoom-whitelisted network without a firewall (ethernet preferred). For information, click here
• Available on DTEN Orbit portal, then on Zoom portal approximately 5-7 days later
• The update will not start if the device is engaged in a meeting or calendar event.
• The update takes approximately 30-45 minutes; DTEN D7 will automatically restart.
• Do not disconnect or power off during the update.   

New

• N/A              

Beta

• InclusiZone for Video (aka Video Boundary) is now in Beta for D7X Windows Single Screen devices. For devices with an Orbit Pro license, users can enable this feature via Orbit and configure the camera’s capture zone. For detailed instructions, refer to the HowTo Guide.
  *This feature is only available on single-screen devices with an active Orbit Pro license or above. D7X W Dual is not supported.

Resolved

• Fixed an issue where, after connecting a Type-C cable to enter BYOD mode while using ZRC, users were unable to switch back to the Zoom main interface.

Known Issue 

• Screen Not Waking Automatically During Office Hours in Sleep Mode
  In Sleep Mode, the device may not automatically wake and light up the screen during scheduled office hours. Additionally, it may not respond to touch inputs to wake the screen.
  • Workaround: Power cycle the device to restore functionality.

Zoom Rooms Version:  6.2.5