Zoom for Home - DTEN ME, ME Pro 27” Release 1.20.0 - November 13, 2024

• Available on DTEN Orbit portal, then on Zoom portal after 4-7 days 
• DTEN ME should be powered on and connected to a stable or open Zoom whitelisted network without a firewall (ethernet preferred). For more information, click here
• Once started, the update will take approximately 30-45 minutes; DTEN ME will automatically restart. Note that the device will only update if it is not in a meeting or calendar event.
• Do not disconnect or power off during the update

New

• Language setting on Orbit - Ability to change Zoom Rooms application language through Orbit.
  

Modified

• N/A

Resolved

• N/A

Known Issue

• When “Screen Saver” is enabled, even if Digital Signage is applied, the device will automatically turn off the screen after 30 minutes of inactivity
• When the Video Boundary feature is enabled, the screen may appear to jump when people are near the defined distance edge.
• When InclusiView is enabled, color balance, image overlap, and misalignment issues with the camera stitching may occur. 
• The screen may occasionally flash green during a meeting. Please report this to the DTEN support team if it happens. 
• When multiple people are on the conference screen with InclusiView enabled, the top of the screen may occasionally flash a red stripe. Please report this to the DTEN support team if it happens. 
• The video output may occasionally be disabled, and the camera switch may be grayed out. Current workaround: restart the device.

Zoom Rooms: 6.1.10