DTEN D7X Android ZR/MTRA (D7X 55 Android & D7X 75 Android & ONboard) - 1.6.5 - September 23, 2024

How to Update

• Release sequence:
  • Immediately At GA: Available on Teams Admin Center.
  • 2-3 Business Days After GA : Available on Orbit.
  • 7-10 Business Days After GA: Available through Zoom Device Management and OOBE update for un-deployed devices.
• The DTEN device(s) should be powered on and connected to a stable and open or Zoom whitelisted network without a firewall (ethernet preferred). For information, click here
• The update will not start if the device is engaged in a meeting or calendar event
• The update takes approximately 30-45 minutes and will automatically restart
• Do not disconnect or power off during the update

New

• Support Smart Connect (BYOD mode) via HDMI+USB-A cable.
  • Some laptops may not have a Thunderbolt USB-C port). With HDMI+USB-A connections, these users can also experience Smart Connect.
• Support DTEN Power-Saving Management
  • Introducing our power-saving management system designed to make devices more energy-efficient and eco-friendly while prolonging the screen's lifespan. This feature is available in three distinct modes that administrators can set up on the DTEN Orbit:
  • Standby Mode:
    • Automatic Detection: Automatic detection is enabled by default on new devices. When the room is unoccupied for more than 30 seconds (as detected by the motion sensor), and the device is not in use, the screen will dim and enter standby mode.
    • Customizable Settings: Administrators may also customize the Standby Mode by setting the idle time or by configuring working hours
  • Sleep Mode: A step up from Standby Mode, Sleep Mode allows administrators to decrease system activity further, bolstering energy conservation.
  • Deep Sleep Mode: Administrators can enable it as a standalone feature or pair it with other modes. The network will be disabled for peak energy saving. The device reawakens only during office hours or via user interaction (screen tap or button press).
• Support setting default speaker volume on Orbit Set Default Volume on DTEN Orbit

Modified

• DTEN Smart Connect BYOD / Monitor Mode Switch Source setting moved to Device Settings - Paired is required and corresponding to DTEN D7X A 1.6.5 and DTEN Bar 1.3.0
• First-time user experience flow optimization. New Out of Box Experience of DTEN Android Devices
• Auto framing optimization
• Optimized the issue that faces are not automatically centered when displayed close to the border under Smart Framing/Multi-focus.

Resolved

• Minor bugs fixes
• Resolved the issue that the Serial number field displays empty under Device Information.

Known Issue 

• “No Signal” After Waking Up: Occasionally, the device may show “No Signal” after waking up from deep hibernation. This issue will be resolved in a future release.
  Quick Fix: Press the reboot button on the OPS.
• Audio Issues in Teams Meetings: Rarely, you may experience intermittent sound, unstable volume, or echo during Teams Room meetings. The issue should resolve itself.
• Writing Issues on Whiteboard: You might notice uneven strokes or lagging responses while writing on the lower part of the MTRA Whiteboard. This issue will be resolved in a future release.
• MacBook Screen Sharing Issue: MacBook users may see a black screen when sharing via Type-C cable in a Zoom Room meeting, especially if the MacBook goes to sleep.
  Quick Fix: Update your MacBook to the latest version.

Zoom Rooms Version: 6.1.5.5274

MTRA Version: 1007